10W/20W/30W/50W/80W/100W IP66 Linear LED SMD Flood Light Driverless Slim

Datasheet:

• No flickering
• No RF interference
• No UV radiation
• No mercury
• 60% less power consumption than traditional light sources
• Low heat emission
• Good heat dissipation
• Super bright illumination
• Reliability
• maintenance free
• Lifespan >= 30,000H
• CE & RoHS compliant

 

• Factories and enterprises, industrial and mining enterprises
• Petroleum, chemical industry workshop, workshop, warehouse
• Highway toll station, gas station, large supermarket
• Exhibition hall, smelting and other inflammable and explosive places as cast light or flood lighting.

 

• Please carefully read the operating instructions before using the products.
• Please check if the power supply meets the requirements. The input voltage of products is AC 85-277V.
• Please cut off the power supply before installation.

Package:



About us:

      Factory building covers an area of 1500 square meters. Equipped with advanced production facilities and production lines of LED tube, par lamp, spotlight and outdoor lighting. 
    
     Rely on quality to survive, innovation to develop. Aim to "customer first, quality first, reputation first, service first". Unremittingly strive to be the most professional LED enterprise with proactive and innovation, based on excellence and refinement of work principle.

   Currently, products have mainly been exported to USA, Spain, Germany, Netherlands, Greece, Denmark, Italy, Brazil, Mexico, Brazil, etc.

FAQ:

Q1:What is the warranty for your lights?

A1:For the lights,we have 3 years warranty, some products 5 years warranty.

Q2:How do you ensure the quality?
A2: We get three QC processes:1.For raw materials;2.During the half of production; 3.Final

QC test one by one after aging 12 hours.

Q3:How to do if any quality problems on your side in the warranty time?
A3: First, take pictures or videos as proof and send to us.We will replace new ones for free.

Q4:OEM OR ODM accepted?
A4:Yes,we can do OEM & ODM,logo on the light or package both are available.

Q5: How many days will samples be finished?And how about the mass production?
A7: Generally 5-7 days for samples making. The leading time of mass production will depend on
the quantity.

 Q6:What is your trade assurance?

A8:100% product quality protection
100% product on time shipment protection
100% payment protection for your covered amount

Datasheet:

• No flickering
• No RF interference
• No UV radiation
• No mercury
• 60% less power consumption than traditional light sources
• Low heat emission
• Good heat dissipation
• Super bright illumination
• Reliability
• maintenance free
• Lifespan >= 30,000H
• CE & RoHS compliant

 

• Factories and enterprises, industrial and mining enterprises
• Petroleum, chemical industry workshop, workshop, warehouse
• Highway toll station, gas station, large supermarket
• Exhibition hall, smelting and other inflammable and explosive places as cast light or flood lighting.

 

• Please carefully read the operating instructions before using the products.
• Please check if the power supply meets the requirements. The input voltage of products is AC 85-277V.
• Please cut off the power supply before installation.

Package:



About us:

      Factory building covers an area of 1500 square meters. Equipped with advanced production facilities and production lines of LED tube, par lamp, spotlight and outdoor lighting. 
    
     Rely on quality to survive, innovation to develop. Aim to "customer first, quality first, reputation first, service first". Unremittingly strive to be the most professional LED enterprise with proactive and innovation, based on excellence and refinement of work principle.

   Currently, products have mainly been exported to USA, Spain, Germany, Netherlands, Greece, Denmark, Italy, Brazil, Mexico, Brazil, etc.

FAQ:

Q1:What is the warranty for your lights?

A1:For the lights,we have 3 years warranty, some products 5 years warranty.

Q2:How do you ensure the quality?
A2: We get three QC processes:1.For raw materials;2.During the half of production; 3.Final

QC test one by one after aging 12 hours.

Q3:How to do if any quality problems on your side in the warranty time?
A3: First, take pictures or videos as proof and send to us.We will replace new ones for free.

Q4:OEM OR ODM accepted?
A4:Yes,we can do OEM & ODM,logo on the light or package both are available.

Q5: How many days will samples be finished?And how about the mass production?
A7: Generally 5-7 days for samples making. The leading time of mass production will depend on
the quantity.

 Q6:What is your trade assurance?

A8:100% product quality protection
100% product on time shipment protection
100% payment protection for your covered amount