Model NO.: USB-UB-001-221-1
Retractable: Not Scalable
Charging Function: Charging Function
IC Chip: With IC Chip
Customized: Customized
Trademark: PALCONN OR ODM
Transport Package: 480PCS/Carton
Specification: USB2.0 Type C to C cable, L=1800mm
Origin: China
Model NO.: USB-UB-001-221-1
Retractable: Not Scalable
Charging Function: Charging Function
IC Chip: With IC Chip
Customized: Customized
Trademark: PALCONN OR ODM
Transport Package: 480PCS/Carton
Specification: USB2.0 Type C to C cable, L=1800mm
Origin: China
Why do I suggest that I choose the built-in Emark IC charging data line? Â Â Â Â Â Because there are several advantages: Â Â
1. The built-in program sets the maximum voltage load capacity (20V max.) and maximum current load capacity (5A max.) of the cable. When you charge your device, the cable will not work beyond the program's set value, thereby protecting your device. Â Â Â Â Â Â
2. The USB-IF authenticated Type C plug connector is used. The built-in program describes the name of the USB-IF authenticated supplier and TID No. When the user uses this Cable to charge and transmit data to your device, the data exchange automatically detects whether the product is legal or not.Â
*********************************************************************
ELECTRICAL CHARACTER:Â 100% OPEN & SHORT TESTING
| Data transmission standard: | USB 2.0 Standard |
| Load current: | 5A max. |
| Cable withstanding Voltage: | 100VAC/DC min. |
| Cable Insulation Resistance: | 10M ohm max. |
| Cable conductive Resistance: | 3 ohm max. |
| VBUS Connects to CC through resistor Rp(56K ohm) | Yes |
| Bending Test:Load=300g, Angle +60/-60,Freq=45cycles/min. | 3000 cycles min. |
| Life Test: | plug 10000cycles. |
| Salt fog test | 48 Hours |
Application: APPLE MacBook,Samsung, HUAWEI, HP, DELL
TYPE C POWER ADAPTER: 29W,40W,45W,60W,65W,87W,100W(5A@20V MAX.)
Identify Type C plug usb-if TID No.Provide data information to the equipment to determine whether it is qualified for certification
E-mark IC built-in program:
USB - IF VID No. : 5510
USB - IF TID No. : 5200000284
Current load capacity :5A Max.
Voltage load capacity: 20V Max.
NOTE:
THE CABLE DON'T NEED HIGH VOLTAGE WHEN INTEGRATIVE TESTING.
Material production capacity
| Type C connector | In house | |
| Type A connector | In house | |
| Tooling | In house | |
| Injection | In house | |
| PCB | Out | |
| SMT | Out | |
| Soldering | In house | |
| Cable | In house | |
| Assembly | In house | |
| Capacity | Cable:30KK/M | |
PRODUCT SPECIFICATION:
| NO. | Item | Test Condition | Requirement |
| 1 | Insulation Resistance | Insert the wire connector electrical measuring machine corresponding to the test fixture,Temperature:25ºC ,Relative humidity:80%RH |
10MΩ(Min) |
| 2 | Cable Assembly Voltage Drop |
Insert the wire connector electrical measuring machine corresponding to the test fixture,Temperature:25ºC ,Relative humidity:80%RH |
250 mV max for GND and 400 mV max for VBUS |
| 3 | Cable Conduction impedance |
Insert the wire connector electrical measuring machine corresponding to the test fixture,Current 1mA,Temperature:25ºC ,Relative humidity:80%RH |
3Ω(Max) |
| 4 | Withstanding Voltage | Insert the wire connector electrical measuring machine corresponding to the test fixture,electric voltage 100VAC/DC Temperature:25ºC ,Relative humidity:80%RH |
No Breakdown,No damage |
| 5 | Contact Resistance | Mate connectors, Measure by dry circuit,20mV Max,100mA |
TYPE C 40mΩ/UAB AM 30mΩ(Max) Max change delta +10mΩ |
| 6 | Flexibility test | ±90°/2000cycles@10cycles per 1minute,Weight is 200g | NO Electrical NG,NO damage |
| 7 | Load test | 5kgf for axis force test | NO Electrical NG,NO damage |
| 8 | Mating/Un-mating Force test | TYPE C Nsertion force:5~20N Withdrawal force:8~20N; USB AM Nsertion force:35N Max Withdrawal force:10N Min | NO Electrical NG,NO damage |
| 9 | Durability | TYPE C Mated and unmated connectors up to 10000 cycles at a minimum rate of 200cycles per hours,mating force 5~20N ; unmating force 8~20N .  USB AM Mated and unmated connectors up to 3000 cycles at a minimum rate of 200cycles per hours,mating force 35N Max; |
NO Electrical NG,NO damage |
| 10 | Humidity Test | Temperature:65±2ºC,Relative Humidity:90%,Duration:96 hours Upon completion of the test,specimens shall be conditioned at ambient room conditions for 96 hours |
NO Electrical NG,NO damage |
| 11 | Salt mist spray | humidity:95-98%(R.H.); Temperature:35±2ºC;time:24hours; PH Value:6.5-7.2. 5%salt solution |
NO Electrical NG,NO damage |
| 12 | Thermal shock | Mate Cable together and perform the test as follows. 10 cycle of: A)-55ºC for 30 minutes; B)+85ºC for 30 minutes |
NO Electrical NG,NO damage |
| 13 | Low temperature test | The cable is exposed to -40ºC atmosphere for 96 hours. After testing it shall be left alone for 1 to 2 hours in room ambient |
NO Electrical NG,NO damage |
| 14 | Heat test | The cable is exposed to 85ºC atmosphere for 96 hours. After testing it shall be left alone for 1 to 2 hours in room ambient. |
NO Electrical NG,NO damage |
PalConn Technology Overview
Company Found 2003
1400+ Employees.
PT is a leading global integrated interconnect  Â
components provider of : Â
-- Mobile Phone , IT, Consumer, Medical, Automotive Industrial, Customer made, etc. Â Â
USB 2 0&3 0&3 1 Type C .0&3.0&3.1 Type C, RJM, SATA HDMI Audio Jacks DC Jacks Battery , HDMI, Audio Jacks, DC Jacks, Battery,SD Card, WTB, Metal part, HDMI Cables. USB 3.1 Cables, USB 2.0 & 3.0
Cable, RCA Cables, DP Cables, AGV Cables, RJ Cables
Â
PalConn Technology Milestones
2003: Shenzhen Factory Founded.
2006: Â ISO 9001:2008 Certified.
2009: Â ISO 14001:2004 Certified.
2009: Taiwan sales Office Established.
2013: Guizhou Factory
2015: TS16949 Certified.
2016: ISO 13485 Certified.
2017:QC08000:2012 Certified.
2017: IPC Certified.
 Why do I suggest that I choose the built-in Emark IC charging data line?     Â
Because there are several advantages: Â Â
1. The built-in program sets the maximum voltage load capacity (20V max.) and maximum current load capacity (5A max.) of the cable. When you charge your device, the cable will not work beyond the program's set value, thereby protecting your device. Â Â Â Â Â Â
2. The USB-IF authenticated Type C plug connector is used. The built-in program describes the name of the USB-IF authenticated supplier and TID No. When the user uses this Cable to charge and transmit data to your device, the data exchange automatically detects whether the product is legal or not.Â
*********************************************************************
ELECTRICAL CHARACTER:Â 100% OPEN & SHORT TESTING
| Data transmission standard: | USB 2.0 Standard |
| Load current: | 5A max. |
| Cable withstanding Voltage: | 100VAC/DC min. |
| Cable Insulation Resistance: | 10M ohm max. |
| Cable conductive Resistance: | 3 ohm max. |
| VBUS Connects to CC through resistor Rp(56K ohm) | Yes |
| Bending Test:Load=300g, Angle +60/-60,Freq=45cycles/min. | 3000 cycles min. |
| Life Test: | plug 10000cycles. |
| Salt fog test | 48 Hours |
Application: APPLE MacBook,Samsung, HUAWEI, HP, DELL
TYPE C POWER ADAPTER: 29W,40W,45W,60W,65W,87W,100W(5A@20V MAX.)
Identify Type C plug usb-if TID No.Provide data information to the equipment to determine whether it is qualified for certification
E-mark IC built-in program:
USB - IF VID No. : 5510
USB - IF TID No. : 5200000284
Current load capacity :5A Max.
Voltage load capacity: 20V Max.
NOTE:
THE CABLE DON'T NEED HIGH VOLTAGE WHEN INTEGRATIVE TESTING.
Material production capacity
| Type C connector | In house | |
| Type A connector | In house | |
| Tooling | In house | |
| Injection | In house | |
| PCB | Out | |
| SMT | Out | |
| Soldering | In house | |
| Cable | In house | |
| Assembly | In house | |
| Capacity | Cable:30KK/M | |
PRODUCT SPECIFICATION:
| NO. | Item | Test Condition | Requirement |
| 1 | Insulation Resistance | Insert the wire connector electrical measuring machine corresponding to the test fixture,Temperature:25ºC ,Relative humidity:80%RH |
10MΩ(Min) |
| 2 | Cable Assembly Voltage Drop |
Insert the wire connector electrical measuring machine corresponding to the test fixture,Temperature:25ºC ,Relative humidity:80%RH |
250 mV max for GND and 400 mV max for VBUS |
| 3 | Cable Conduction impedance |
Insert the wire connector electrical measuring machine corresponding to the test fixture,Current 1mA,Temperature:25ºC ,Relative humidity:80%RH |
3Ω(Max) |
| 4 | Withstanding Voltage | Insert the wire connector electrical measuring machine corresponding to the test fixture,electric voltage 100VAC/DC Temperature:25ºC ,Relative humidity:80%RH |
No Breakdown,No damage |
| 5 | Contact Resistance | Mate connectors, Measure by dry circuit,20mV Max,100mA |
TYPE C 40mΩ/UAB AM 30mΩ(Max) Max change delta +10mΩ |
| 6 | Flexibility test | ±90°/2000cycles@10cycles per 1minute,Weight is 200g | NO Electrical NG,NO damage |
| 7 | Load test | 5kgf for axis force test | NO Electrical NG,NO damage |
| 8 | Mating/Un-mating Force test | TYPE C Nsertion force:5~20N Withdrawal force:8~20N; USB AM Nsertion force:35N Max Withdrawal force:10N Min | NO Electrical NG,NO damage |
| 9 | Durability | TYPE C Mated and unmated connectors up to 10000 cycles at a minimum rate of 200cycles per hours,mating force 5~20N ; unmating force 8~20N .  USB AM Mated and unmated connectors up to 3000 cycles at a minimum rate of 200cycles per hours,mating force 35N Max; |
NO Electrical NG,NO damage |
| 10 | Humidity Test | Temperature:65±2ºC,Relative Humidity:90%,Duration:96 hours Upon completion of the test,specimens shall be conditioned at ambient room conditions for 96 hours |
NO Electrical NG,NO damage |
| 11 | Salt mist spray | humidity:95-98%(R.H.); Temperature:35±2ºC;time:24hours; PH Value:6.5-7.2. 5%salt solution |
NO Electrical NG,NO damage |
| 12 | Thermal shock | Mate Cable together and perform the test as follows. 10 cycle of: A)-55ºC for 30 minutes; B)+85ºC for 30 minutes |
NO Electrical NG,NO damage |
| 13 | Low temperature test | The cable is exposed to -40ºC atmosphere for 96 hours. After testing it shall be left alone for 1 to 2 hours in room ambient |
NO Electrical NG,NO damage |
| 14 | Heat test | The cable is exposed to 85ºC atmosphere for 96 hours. After testing it shall be left alone for 1 to 2 hours in room ambient. |
NO Electrical NG,NO damage |
PalConn Technology Overview
Company Found 2003
1400+ Employees.
PT is a leading global integrated interconnect  Â
components provider of : Â
-- Mobile Phone , IT, Consumer, Medical, Automotive Industrial, Customer made, etc. Â Â
USB 2 0&3 0&3 1 Type C .0&3.0&3.1 Type C, RJM, SATA HDMI Audio Jacks DC Jacks Battery , HDMI, Audio Jacks, DC Jacks, Battery,SD Card, WTB, Metal part, HDMI Cables. USB 3.1 Cables, USB 2.0 & 3.0
Cable, RCA Cables, DP Cables, AGV Cables, RJ Cables
Â
PalConn Technology Milestones
2003: Shenzhen Factory Founded.
2006: Â ISO 9001:2008 Certified.
2009: Â ISO 14001:2004 Certified.
2009: Taiwan sales Office Established.
2013: Guizhou Factory
2015: TS16949 Certified.
2016: ISO 13485 Certified.
2017:QC08000:2012 Certified.
2017: IPC Certified.
Â
Thick Copper Pcb
Thick copper PCB products are used extensively in power electronic devices and power supply systems. A growing trend in the PCB industry, this unique type of heavy copper PCB features a finished copper weight of more than 4oz (140μm), compared to the 1oz (35μm) or 2oz (0μm) copper weight generally found in those with a standard PCB copper thickness.
The additional copper PCB thickness enables the board to conduct a higher current, achieve good thermal distribution and implement complex switches in a limited space. Other advantages include increased mechanical strength at connector sites, the ability to create a smaller product size by incorporating multiple weights on the same layer of circuitry and the ability to use exotic materials to their maximum capacity with minimal risk of circuit failure.
Copper PCB Manufacturing Capabilities Table
Topscom is a highly skilled PCB manufacturer that can develop and produce a superior thick copper PCB product of the highest quality. We offer a thick copper PCB manufacturing service that uses copper weights of up to 15oz (525μm). Check our capabilities in the following table:
| Feature | Capability |
| Quality Grade | Standard IPC 2 |
| Number of Layers | 2 - 24layers |
| Order Quantity | 1pc - 10000+pcs |
| Build Time | 2days - 5weeks |
| Material | FR-4 Standard Tg 140°C, FR4-High Tg 170°C |
| Board Size | Min 6mm x 6mm | Max 457mm x 610mm |
| Board Thickness | 0.6mm - 6.5mm |
| Max Outer Layer Copper Weight (Finished) | 15oz |
| Max Inner Layer Copper Weight | 12oz |
| Min Tracing/Spacing |
For External layers: 4oz Cu 9mil/9mil 5oz Cu 11mil/11mil 6oz Cu 13mil/13mil 12oz Cu 20mil/32mil 15oz Cu 32mil/40mil For Internal layers: 4oz Cu 8mil/12mil 5oz Cu 10mil/14mil 6oz Cu 12mil/16mil 12oz Cu 20mil/32mil |
| Solder Mask Sides | As per the file |
| Solder Mask Color | Green, White, Blue, Black, Red, Yellow |
| Silkscreen Sides | As per the file |
| Silkscreen Color | White, Black, Yellow |
| Surface Finish |
HASL - Hot Air Solder Leveling Lead Free HASL - RoHS ENIG - Electroless Nickle/Immersion Gold - RoHS |
| Min Annular Ring | 6mil |
| Min Drilling Hole Diameter | 10mil |
| Other Techniques |
Gold fingers Blind/Buried Vias |
Topscom has a decade of experience in manufacturing and assembling high-performing standard and heavy copper PCB products that help our customers achieve their productivity and profitability goals. We make it a standard operating procedure to have our highly skilled engineers run design for manufacture on every circuit file, and address all questions and concerns before production. This helps to ensure the finished electronic boards meet your performance expectations. Our capable staff includes an in-house quality control department - we guarantee the quality of our printed circuit boards.
Thick Copper Pcb
Thick Copper Pcb,Heavy Copper Thickness Ds Pcb,2 Layers Thick Copper Pcb,Long Thick Copper Pcb
Topscom Technology Co., Ltd. , http://www.pcbassemblycn.com