Millet TV 2 55-inch not only has the most abundant interface, but also comes standard with a USB 3.0 interface, the fastest transfer rate up to 5Gbps, through the USB connection to play U disk or mobile hard disk 4K movie, no card frame, no delay, smooth Dripping.
USB3.0 - Also considered SuperSpeedUSB. It greatly increases the bandwidth - up to 5Gbps full duplex (USB2.0 is 480Mbps half duplex); achieves better power management; enables the host to provide more power to the device to achieve USB - charging Applications such as batteries, LED lighting, and mini fans; enable the host to recognize the device faster; new protocols make data processing more efficient.
USB 3.0 equipped with the millet TV 2 can transmit large-capacity files (such as HD movies) at a storage rate defined by the storage device. For example, a USB 3.0 flash drive can transfer 1 GB of data to a host in 15 seconds, while USB 2.0 takes 43 seconds.
USB3.0 data transmission
USB3.0 introduces full-duplex data transmission. Two of the five lines are used to send data, two are used to receive data, and one is a ground line. In other words, USB 3.0 can read and write simultaneously at full speed.
USB3.0 Power Management
Instead of using device polling, USB 3.0 uses an interrupt-driven protocol. Therefore, the standby device does not consume power before interrupt request data transmission. In short, USB 3.0 supports standby, sleep, and suspend states.
USB 3.0 can provide more power when needed, automatically reducing power consumption when not needed
USB 3.0 can provide 50% - 80% more power to support those devices that require more power to drive, and those devices that charge via USB are predictive of faster charging.
1. Electrical Laminated Wood is widely used as insulating and supporting material in transformers and instrument transformers. It has many virtues such as moderate specific gravity, high mechanical properties, easy vacuum drying, easy mechanical processing etc. The dielectric constant of this material is close to transformer oil, so it makes a reasonable insulation match. And it can be used in transformer oil of 105℃ for long time.
2. People usually use this material to make upper/lower pressure pieces, cable supporting beams, limbs, spacer blocks in oil-immersed transformers, and clamps in instrument transformers. It replaced steel plates, insulating paper sheets, epoxy paper sheets, epoxide woven glass fabric lamination in these fields, and cut down the material expenses and weight of transformers.
3. The raw materials of electrical laminated wood are high quality birch and willow timbers. After boiling, rotary cutting, drying, these timbers are made to veneers. At last the veneers will be glued with special insulating gluewater and processed under high temperature and pressure.
Electrical Laminated Wood
Electrical Laminated Wood,Birch Plywood Sheets,Birch Laminated Wood,Electrical Birch Plywood
Yingkou Dongyuan Electrical Insulation Board Co.,Ltd , https://www.dy-insulation.com