Simple description of different control methods for smart handheld controllers

Smart handheld controller operation

The V8 smart handheld controller is a control device developed using wireless two-way transmission, MCU intelligent control and other technologies, with the supporting V8 smart home terminal equipment to achieve centralized control of household appliances, timing control and quick management of security equipment, and also has a simple infrared The learning function can directly adjust TV channels, volume, etc.

1. The function of V8 smart handheld controller

(1) The V8 Smart Hand-Held Controller is battery-powered and can be moved without any connection.

(2) Supports 9 floors, 11 rooms on each floor, 10 devices in each room, supports control of up to 990 devices, and a home can be equipped with multiple V8 smart handheld controllers.

(3) 990 unit movement control, large screen large font display, can control 990 units in one interface, can realize the hidden function of unused units.

(4) A number of fast bricks to avoid the advantages of a variety of Chivalry combination to quickly achieve unit positioning, shortcut keys (unlock, help, arm, disarm, etc.).

Smart handheld controller operation

1. Operation instructions

Electrical parameters:

Power: 2 7# alkaline batteries.

Power Consumption: 20μA (power saving mode) is 5mA (operation mode).

The smart hand-held controller has automatic power-saving function. The hand-held control/device does not operate the backlight within about 15 seconds. After about 8 seconds, it enters the power-saving mode without any operation and the keyboard is locked.

2. Control electrical appliances

1) Select device

(1) Select the floor. Press the "floor" key to cycle through the floors on which the device is located. The floor code at the location of the floor unit code will change.

(2) Select the room. Press "Left" or "Right" to select a room and the selected room will "blink".

(3) Select the unit. Press the "Up button" or "Down button" to select the unit. The "Select box" of the selected unit will flash.

2) Control equipment

After selecting the device, click the "Confirm" button to change the operating status of the selected device.

The icon of the selected appliance is displayed in the middle, indicating that the appliance is working and not displayed, indicating that the appliance is not working. Press the "confirm" button to control the opening or closing of the appliance.

Quick control: Press the number key “0-9” to change the working status of the corresponding appliance in the current room. Press number key 0 to control the opening or closing of the main light in the current room.

3) Electrical adjustment

(1) Light intensity adjustment. The brightness of the light is controlled by the V8 smart handheld controller. Press the arrow keys to select the unit to be controlled. The selected box will flash, press the "Confirm" button to open the unit.

Press and hold the “Up button” to release the hand. After 1s, the light starts to brighten until it reaches the maximum brightness.

Press and hold the “Down button” to relax, and the light starts to dim after 1s until it reaches the minimum brightness.

When releasing to the ideal brightness, release the “up button” or “down button”, the light is the desired brightness.

When the light is dimmed, a drop of sound can be heard. The current state can be confirmed by looking at the numbers displayed at the bottom right of the LCD screen. For example, “50” means that the current state is 50%.

(2) Electric curtain adjustment. The V8 smart handheld controller controls the opening and closing of curtains, and the opening degree of the curtains can be adjusted as desired.

Press the arrow keys to select the curtain unit to be controlled, and the selected curtain "selection box" will flash.

Turn on and off: Press the "Confirm" button to open the curtain, the curtain will open slowly until fully open. Press the "Confirm" button in the open state to close the curtain, and the curtain slowly closes until it is completely closed.

Hold down the "up" key to relax, after 1s the curtains gradually open until fully open. If you adjust to the ideal switch status, you can stop it.

Hold down the “down” key and do not let go. After 1s, the curtains will gradually close until they are completely closed.

If you adjust to the ideal switch status, you can stop it. You can confirm the current status by looking at the number displayed on the bottom right of the LCD screen. For example, "50" means that the current status is 50%.

(3) TV regulation. There are two kinds of smart TV controllers or smart 1 handheld controllers for TV adjustment. They have learned the infrared code of the TV remote controller, and can operate one TV. The smart handheld controller supports "TV" devices in the "living room" and "main bedroom" on the 1-3rd floor. Adjust "up button" and "down button" to adjust the replacement of TV channels; "left button" and "right button" can adjust the volume of the TV.

The smart handheld controller controls the TV directly as follows:

The "IR window" is aimed at the TV infrared receiving window. Pressing the "Up button" for a long time increases the number of TV channels. When the channel is adjusted to the appropriate channel, the "Up button" can be released.

The "IR window" is aimed at the TV infrared receiving window. Press and hold the "Down button" to reduce the number of TV channels. When the channel is adjusted to the appropriate channel, release the "Down button".

Align the "IR window" with the TV infrared receiving window. Press and hold the "left button" to increase the volume of the TV. When the volume is adjusted to the appropriate volume, release the "left button".

The "IR window" is aimed at the TV infrared receiving window. Press and hold "Right" to decrease the volume of the TV. When the volume is adjusted to the appropriate volume, release the "Right button".

(4) Air conditioning switch adjustment. The wireless intelligent air-conditioning switch installed with the V8 smart home system can control the opening and closing of the air conditioner through the V8 smart handheld controller, and can adjust the operating temperature of the air conditioner.

Press the arrow keys to select the air conditioning unit to be controlled. The selected air conditioning "selection box" will flash.

Turn on and off: Press “Confirm” to turn on the air conditioner, and the air conditioner is turned on. The default number of closed temperatures is turned on. Press the "Confirm" button again to turn off the air conditioner. When the air conditioner is on, press and hold the “up” key to relax. Adjust the air conditioner temperature upwards and adjust it to the desired temperature to release it. Press and hold the “Down” button to release the air conditioner. Adjust the temperature of the air conditioner down to the desired temperature and release it. You can confirm the current status of the air conditioner by looking at the number displayed on the bottom right of the LCD screen. For example, “20” means that the air conditioner is now in the cooling 20°C state.