Tencent Digital (Compilation: Rabbit) Apple just released the iPhone 7 and iPhone 7 Plus soon, and this new iPhone is still regarded as a new product that Apple's replacement and production but not a new design. Therefore, despite the new features such as the bright black body, dual camera, and touch home button, we are still full of expectations for the iPhone 8 next year.
2017 is the day of the 10th anniversary of Apple's iPhone. There have been previous news that Apple intends to use major changes and new features on the iPhone 8 in 2017. Therefore, even KGI's famous analyst Guo Mingchi said that next year Apple will use the iPhone 8 body with a full glass body and add wireless charging capabilities.
So for future generations of new iPhone 8, we may wish to first take a look at the news and rumors that we know so far.
name
According to Apple's habits, if this year's products are iPhone 7 and iPhone 7 Plus, then next year should be iPhone 7s and iPhone 7s Plus, but according to employees from Apple's Herzliya Research and Development Center, Apple is likely to be directly next year. Name your new product with iPhone 8.
At the same time, the Apple employee named Moskowitz also stated that Apple will add a large number of new features to the iPhone 8, including the first use of OLED displays and wireless charging technology.
New features
According to the new information that was exposed before, our expectations for the new features of the iPhone 8 basically include the following aspects:
All-glass body design;
Wireless charging;
OLED/AMOLED display
5.8 inch display,
A11 processor
Intel 7360 LTE Modem
iOS 11 system;
No Home key design;
Design
According to information from inside the supply chain, it also confirmed that the iPhone 8 will use the glass body. Insiders confirmed that next year's iPhone 8 will be 100% sure that all models of the shell are replaced with 3D glass, and uses a double glass + metal frame design. Due to the inherent flaws of the seamless all-metal body design, the double glass + metal middle frame design scheme can weigh the aesthetics and enhance the strength of the fuselage. In addition, Apple will use a special treatment of the metal middle frame to improve the scratch resistance.
In addition, the Apple Patent and Trademark Office recently announced a patent that Apple applied for in September 2014. The name of the patent is “Capacitive Fingerprint Sensor with Electrostatic Lensâ€.
Foreign media speculated that this patent is very likely to appear on the iPhone 8, in short, it is Under Glass fingerprint recognition, no need to open a hole in the cover glass, directly integrated fingerprint identification module under the glass.
The iPhone 7 has designed the Home key as a no-touch style. According to legend, on the iPhone 8, the Home key may be completely abandoned. Apple may develop a virtual button and maintain the same functionality.
OLED display
One of the biggest changes for the iPhone 8 next year is that we will finally usher in the use of OLED displays. As we all know, iPhone handset products have always been using LCD display technology. It is said that in 2017, Apple may change this tradition. In fact, before the iPhone 7 was released, it was reported that the two iPhones in 2017 will use OLED displays, and that Samsung and LG are ready to go. The two South Korean giants are also leaders of the current OLED screens. By.
However, according to the latest news from "Bloomberg", Apple has begun to begin close contact with Japan's Sharp, the purpose is to make Sharp supply OLED screen for the iPhone 8, and Apple's only requirement for Sharp is: to ensure the OLED screen Adequate productivity.
Sharp is always one of Apple's screen suppliers, but the manufacturer currently does not have a production line that can produce OLED screens. Sharp started late in this area. Fortunately, Sharp officially announced today that they will invest 500 million US dollars for the OLED screen production line, this news will undoubtedly give Apple more confidence in cooperation.
Hardware Configuration
Apple has used the A10 Fusion processor on this year's iPhone 7 and iPhone 7 Plus, so iPhone 8 of course will continue to use the A11 processor next year. According to the "Electronic Times", TSMC will use its latest InFO and WLP wafer-level packaging technology for Apple's A11 processor.
In May of this year, it was reported that the iPhone in 2017 will use the A11 processor and will begin small-scale production in the second quarter of 2017. At the same time, about two-thirds of the A11 chip orders were handed over to TSMC for production, while the remaining one third was handed over to Samsung. The two companies will use 14nm and 16nm processes to produce chips for Apple. But from now on, Apple seems to have decided to use its 10nm process directly to manufacture its own chip products in 2017.
Screen recognition
Above we mentioned a screen "Capacitive Fingerprint Sensor with Electrostatic Lens". The patent mentions a technology that may appear in the iPhone 8 next year, which is a fingerprint recognition sensor embedded in the bottom of the screen.
The patent obtained this time seems to have overcome some design obstacles technically, and through the introduction of capacitive sensing technology, through the distance in space, future touch recognition can be embedded below the screen.
In order to reduce the interference caused by the gap, Apple proposed the use of electrostatic lenses. In short, the technology is actually one or more patterned conductive layers. Based on their location, relative voltage and shape, the electrical layer can form or bend the electrical field associated with the user's finger. This bending can, in some cases, counteract the interference of an electric field generated by a finger because it is naturally dispersed through a dielectric layer or space.
Since the initial iPhone was introduced in 2007, the Home key has been one of the most important signs of Apple’s mobile devices. In addition to returning to the main interface, Apple also added features such as activating Siri and Touch ID. If Apple really wants to cancel the Home button, it seems that consumers need time to adapt.
Curved screen body
Also an Apple patent, it also hinted that the iPhone 8 will adopt a curved screen body design. The patent, entitled "Glass enclosure," describes a technology that enables mobile devices to realize the manufacturing process of curved glass enclosures. Perhaps the iPhone 8 can really achieve the experience of a curved all-glass body. The body does not have any physical buttons and provides more. Excellent waterproof rating.
Apple described the “hand-held computing device with a glass material forming structure as a body, and the body can penetrate the antenna's electric wave signalâ€. “The housing can be formed by a single hollow glass tube or two glass structures. The laser glass continuous melting process can be used. The two glass structures are sealed together to form a completely waterproof electronic device."
Apple further explained that all-glass mobile devices can be built into antenna devices for wireless communications. The high-strength glass structure allows the phone to be waterproof and resistant to scratches. The glass case is a single body instead of being divided into two parts like the previous iPhone.
Wireless charging
At present, many smart phones already have wireless charging capabilities. Therefore, it is natural for the iPhone 8 to add support for wireless charging next year.
According to Apple's other patent for wireless charging, Apple's wireless charging device uses a cylindrical design, which houses wireless charging components. Unlike traditional electromagnetic induction charging, Apple's base seems to use radio waves and magnetic resonance for charging, so it is more convenient to use than traditional wireless charging.
Source:trustedreviews
Deutz engine Diesel Generator sets
1.Famous engine&alternator
2.Reliable working
Alternator
Stamford, Leory Somer, Engga, Marathon, Siemens, ST/STC etc.
Rigorous testing
must be done before delivery, including 50%
load, 75%load, 100%load, 110%. And all protection function(over speed stop, high water
temperature, low oil pressure, battery Charging fail, emergency stop)
Warranty
The goods are under warranty against defects in material and workmanship for a period of 12 months or 1000 hours ,whichever come first from the date of delivery to the end user except the damageable spare parts of genset caused by incorrect man-made operation, and that the aforementioned warranty for the same taken is back up by the engine and alternator suppliers.
Deutz Engine Diesel Generator,Deutz Diesel Generator,Deutz Diesel Power,Deutz Generator Set
FUZHOU LANDTOP CO., LTD , https://www.landtopco.com