LED lighting will replace mainstream incandescent lighting and other lighting technologies, occupying a dominant position in the market. But the transition from old technology to new technology will take many years. During this time, the challenge for LED light designers was to ensure that the new design was compatible and reliable with existing controllers and cabling architectures originally developed for incandescent lighting. This article describes a solution that can be applied to both low-power and high-power LED lighting systems. It is proven and mature.
LED bulb construction
An LED light contains one to a dozen or more LED chips , which are usually connected in series. The luminance of each chip is determined by the amount of current passing through it. Due to the series connection, each LED chip in the bulb will automatically pass the same current, but the voltage on each chip is different. The forward voltage drop of the LED is typically 3.4V, but will vary from 2.8V to 4.2V. LEDs can be categorized to limit voltage fluctuations, but this adds cost and the forward voltage drop still varies with temperature and time of use. To provide consistent light output, LEDs must be driven by a highly regulated, constant current source. As an alternative to incandescent lamps, the lamp must be integrated into the lamp housing.
Typical integrated LED lamps include drive circuitry, LED bundles, and enclosures that provide both mechanical protection and heat dissipation for the driver and LED chips.
The requirements for LED drivers are very strict. It must be energy efficient, must meet stringent EMI and power factor specifications, and be safe to withstand various fault conditions. One of the most difficult requirements is to have a dimming function. Due to the mismatch between the characteristics of the LED lamp and the dimming controller designed for incandescent lamps, it is prone to poor performance. The problem may be slow start, flicker, uneven illumination, or flicker when adjusting the brightness. In addition, there are problems such as inconsistent performance of individual units and audible noise emitted by LED lamps. These negative conditions are usually caused by false triggering or premature shutdown of the controller and improper control of the LED current.
Dimming controller
The lighting controller works in either line dimming or PWM dimming. The simplest line dimming method is the leading edge thyristor controller. This is currently the most commonly used lighting control method, but unfortunately, the use of thyristor controllers to dim LED lights can cause a lot of problems. More advanced line dimmers are electronic leading or trailing edge dimmers. PWM dimmers are used in professional lighting systems.
This style is 4 In 1 Vacuum Cleaner. 4 in 1 Vacuum Cleaner is a kind of Portable Vacuum Cleaner. It's easy to carry and use. So you can use in many places easily. This kind of vacuum cleaner is also very beautiful and useful. It is small in size and store easily. This kind vacuum cleaner is also a multi-cyclone upright vacuum cleaner for high separation rate,so it will make your cleaning more effortlessly. In a word,it is a very useful vacuum cleaner,hope you will like it.
4 In 1 Vacuum Cleaner
4 In 1 Vacuum Cleaner, Hand Held Vacuum Cleaners
Ningbo ChinaClean Household Appliances Manufacture Co., Ltd. , http://www.chinaclean-elec.com