Semiconductor lighting is the most strategic emerging industry in the 21st century. In recent years, all countries in the world have arranged special funds, set up special plans, formulated a strict incandescent lamp elimination plan, and vigorously supported the domestic semiconductor lighting technology innovation and industrial development.
China's "Twelfth Five-Year Plan" "Outline" put energy conservation and environmental protection into important strategic areas. On May 12, 2012, the Announcement of the National Development and Reform Commission of the People's Republic of China (No. 10 of 2012) was issued, and the list of enterprises and energy conservation targets of the “10,000 Energy Saving and Low Carbon Actions for Enterprises†was determined. "The work of energy conservation and emission reduction has been implemented. According to the 10% calculation of electricity consumption, if LED lighting is used, the annual energy saving contribution of the lighting part of the operation will be 75 billion kWh.
The state's policy support is so strong, what about the industry?
In the LED lighting market, the sound of "LED lighting products are too expensive" is often heard, so it cannot be widely accepted. If it is to be applied in a large area, it must reach a certain price and so on. Responding to this argument is the large number of LED products on the market that use low prices as a means of competition, cut corners, and shoddy LED products. When many local governments promote LED street lights, the bidding documents stipulate the lowest price.
Due to the lack of relevant national standards, coupled with insufficient market performance, the market promotion is not true, which makes the market support for LED lighting energy-saving products unable to achieve the due attempts and breadth. At the same time, the products with inferior quality and exaggeration are in the market, and the advantages of promotion and application of excellent products cannot be obtained by authoritative certification, which seriously hinders the healthy development of the LED lighting market. How to change the status quo, starting with the establishment of relevant standards.
Technological innovation, strive for international leadership
Yu Zhilong, general manager of Shanghai William Lighting Electric, said: We should pay attention to technological innovation, develop our own technical routes, and not blindly copy and imitate, but also avoid follow-up speculation. Otherwise, it will seriously hinder the healthy development of China's LED industry. Technology research and development should be vigorously carried out, focusing on how to improve the LED lighting system's light efficiency, product life, product performance, product quality and product reliability, reduce costs, and really improve the technical level of China's LED, overcome the core technical difficulties, Strive to take the lead in the international arena.
People who are exposed to LED lighting technology know that as the operating temperature of the LED chip increases, the life and luminous efficiency of the LED will decrease, so the heat dissipation of the LED is very important. At present, manufacturers engaged in this area are generally trying to find ways to solve the heat dissipation problem by using the most effective heat sink. When this issue becomes a hot topic in the industry, can you change your mindset, avoid or use less heat sinks or use other better methods? As we all know, LED lighting needs to be equipped with light, and Philips and other companies use secondary light distribution technology. The route, so everyone rushed to the battle. Can you get a light distribution that optimizes the process while improving efficiency? This question is worth pondering.
Strengthening the legal system and protecting intellectual property rights
LED lighting technology is a system engineering that requires systematic consideration of technical solutions. In the application of Edva system, the R30 spotlight produced two years ago, still ranks first in the energy star LED lighting products, 50,000 hours of energy efficiency in the US Energy Star LED lighting products. First place, this is a good example. LED lighting is still very young, and there are many places to improve and innovate. In the recent bidding for financial subsidies for LED lighting products led by the relevant departments of our country, such problems exist. Regarding the financial subsidies for LED lighting products in the relevant countries, the famous lighting experts in China have given the opinion that there is no relevant national standard, how to implement subsidies?
The national authorities responsible for LED lighting do not seem to be clear enough, and the average company is easily confused. At present, there are several key departments involved in LED lighting in China, plus various associations, alliances and local departments.
Generally, long-term leaders are likely to cause duplication of management functions, low management efficiency, high management costs, and the tendency to waste social resources and national financial resources. Can we learn from the experience of other countries to improve management efficiency and save national expenditure.
Let us know about the US approach. Since the “evolution of the solid-state lighting market requires government sponsorship†(excerpted from “LEDs for General Illumination Update 2002-Full Editionâ€), the US government has given the LED industry four aspects: macro planning, technology research and development, government procurement, and association support. Strong support. Take the "Energy Star" semiconductor general lighting promoted by the US government as an example. The United States will take the lead department of the Ministry of Energy to organize experts in the field of semiconductor lighting, manufacturers, design teams, and marketing agencies to discuss the development of semiconductors. Lighting "Energy Star" standard, LED lighting technology development process has developed a series of test standards and testing methods, established "Lighting Facts Label" to reflect the real performance data of LED lighting products, to the national legal certification department test Products that meet the "Energy Star" standard are issued the "Energy Star" logo, and the proper use of this registration mark is strictly enforced. After completing the above preliminary work, the Ministry of Energy returned the management of the “Energy Star†certification for LED lighting products to the US Environmental Protection Agency (EPA).
In the development of standards, we must brainstorm and consider the optimization of economic and social benefits. “I have participated in the formulation of the US ENERGY STAR solid-state lighting standard and proposed the modification of one of the power factor requirements. I adopted the recommendations in the finalized standard, and there is basically no LED light less than 5W. Power factor requirements. This alone can save society billions of resources."
The ENERGY STAR program helps businesses and consumers make more informed decisions by providing reliable, objective information.
Facts have proved that the "Lighting Facts Label" and "Energy Star" logo measures adopted by the US government have changed consumers' consumption habits, improved the energy efficiency concept of consumers and manufacturers, and effectively achieved market guidance. At the same time, "Energy Star" is the basis for government procurement of energy-saving products in the United States. It provides very clear market information for manufacturers and distributors, expands the market for energy-saving products, promotes the scale development of energy-saving industries, and reduces the price of energy-saving products. Promote the popularization of energy-saving products and promote the progress of energy-saving technologies.
Improve standards and strengthen supervision mechanisms
Nowadays, the "Energy Star" logo has penetrated into many fields and is the root of the trust of American consumers. The Department of Energy also developed the CALIPER mechanism to randomly and periodically check LED lighting products from the market and publish them to the public. Use this method to regulate market integrity to urge manufacturers to grasp the quality and effectively promote the healthy development of the LED lighting market.
All government departments should focus on national interests and people's interests, establish streamlined and efficient competent departments, organize social forces as soon as possible to formulate LED lighting product standards, establish statutory testing institutions, update testing methods and equipment, and formulate industry-wide testing standards (for reference). ENERGY STAR "Standard and Certification System" and establish a monitoring mechanism to maintain market norms (learn from the CALIPER mechanism). It is believed that under the leadership of the relevant government departments, through the joint efforts of social forces, the long-awaited national LED lighting product standards and specifications will certainly come out, and only in this way, China's semiconductor lighting industry can develop healthily.
(This article is reproduced on the Internet. The texts and opinions expressed in this article have not been confirmed by this site, nor do they represent the position of Gaogong LED. Readers need to verify the relevant content by themselves.)
China's "Twelfth Five-Year Plan" "Outline" put energy conservation and environmental protection into important strategic areas. On May 12, 2012, the Announcement of the National Development and Reform Commission of the People's Republic of China (No. 10 of 2012) was issued, and the list of enterprises and energy conservation targets of the “10,000 Energy Saving and Low Carbon Actions for Enterprises†was determined. "The work of energy conservation and emission reduction has been implemented. According to the 10% calculation of electricity consumption, if LED lighting is used, the annual energy saving contribution of the lighting part of the operation will be 75 billion kWh.
The state's policy support is so strong, what about the industry?
In the LED lighting market, the sound of "LED lighting products are too expensive" is often heard, so it cannot be widely accepted. If it is to be applied in a large area, it must reach a certain price and so on. Responding to this argument is the large number of LED products on the market that use low prices as a means of competition, cut corners, and shoddy LED products. When many local governments promote LED street lights, the bidding documents stipulate the lowest price.
Due to the lack of relevant national standards, coupled with insufficient market performance, the market promotion is not true, which makes the market support for LED lighting energy-saving products unable to achieve the due attempts and breadth. At the same time, the products with inferior quality and exaggeration are in the market, and the advantages of promotion and application of excellent products cannot be obtained by authoritative certification, which seriously hinders the healthy development of the LED lighting market. How to change the status quo, starting with the establishment of relevant standards.
Technological innovation, strive for international leadership
Yu Zhilong, general manager of Shanghai William Lighting Electric, said: We should pay attention to technological innovation, develop our own technical routes, and not blindly copy and imitate, but also avoid follow-up speculation. Otherwise, it will seriously hinder the healthy development of China's LED industry. Technology research and development should be vigorously carried out, focusing on how to improve the LED lighting system's light efficiency, product life, product performance, product quality and product reliability, reduce costs, and really improve the technical level of China's LED, overcome the core technical difficulties, Strive to take the lead in the international arena.
People who are exposed to LED lighting technology know that as the operating temperature of the LED chip increases, the life and luminous efficiency of the LED will decrease, so the heat dissipation of the LED is very important. At present, manufacturers engaged in this area are generally trying to find ways to solve the heat dissipation problem by using the most effective heat sink. When this issue becomes a hot topic in the industry, can you change your mindset, avoid or use less heat sinks or use other better methods? As we all know, LED lighting needs to be equipped with light, and Philips and other companies use secondary light distribution technology. The route, so everyone rushed to the battle. Can you get a light distribution that optimizes the process while improving efficiency? This question is worth pondering.
Strengthening the legal system and protecting intellectual property rights
LED lighting technology is a system engineering that requires systematic consideration of technical solutions. In the application of Edva system, the R30 spotlight produced two years ago, still ranks first in the energy star LED lighting products, 50,000 hours of energy efficiency in the US Energy Star LED lighting products. First place, this is a good example. LED lighting is still very young, and there are many places to improve and innovate. In the recent bidding for financial subsidies for LED lighting products led by the relevant departments of our country, such problems exist. Regarding the financial subsidies for LED lighting products in the relevant countries, the famous lighting experts in China have given the opinion that there is no relevant national standard, how to implement subsidies?
The national authorities responsible for LED lighting do not seem to be clear enough, and the average company is easily confused. At present, there are several key departments involved in LED lighting in China, plus various associations, alliances and local departments.
Generally, long-term leaders are likely to cause duplication of management functions, low management efficiency, high management costs, and the tendency to waste social resources and national financial resources. Can we learn from the experience of other countries to improve management efficiency and save national expenditure.
Let us know about the US approach. Since the “evolution of the solid-state lighting market requires government sponsorship†(excerpted from “LEDs for General Illumination Update 2002-Full Editionâ€), the US government has given the LED industry four aspects: macro planning, technology research and development, government procurement, and association support. Strong support. Take the "Energy Star" semiconductor general lighting promoted by the US government as an example. The United States will take the lead department of the Ministry of Energy to organize experts in the field of semiconductor lighting, manufacturers, design teams, and marketing agencies to discuss the development of semiconductors. Lighting "Energy Star" standard, LED lighting technology development process has developed a series of test standards and testing methods, established "Lighting Facts Label" to reflect the real performance data of LED lighting products, to the national legal certification department test Products that meet the "Energy Star" standard are issued the "Energy Star" logo, and the proper use of this registration mark is strictly enforced. After completing the above preliminary work, the Ministry of Energy returned the management of the “Energy Star†certification for LED lighting products to the US Environmental Protection Agency (EPA).
In the development of standards, we must brainstorm and consider the optimization of economic and social benefits. “I have participated in the formulation of the US ENERGY STAR solid-state lighting standard and proposed the modification of one of the power factor requirements. I adopted the recommendations in the finalized standard, and there is basically no LED light less than 5W. Power factor requirements. This alone can save society billions of resources."
The ENERGY STAR program helps businesses and consumers make more informed decisions by providing reliable, objective information.
Facts have proved that the "Lighting Facts Label" and "Energy Star" logo measures adopted by the US government have changed consumers' consumption habits, improved the energy efficiency concept of consumers and manufacturers, and effectively achieved market guidance. At the same time, "Energy Star" is the basis for government procurement of energy-saving products in the United States. It provides very clear market information for manufacturers and distributors, expands the market for energy-saving products, promotes the scale development of energy-saving industries, and reduces the price of energy-saving products. Promote the popularization of energy-saving products and promote the progress of energy-saving technologies.
Improve standards and strengthen supervision mechanisms
Nowadays, the "Energy Star" logo has penetrated into many fields and is the root of the trust of American consumers. The Department of Energy also developed the CALIPER mechanism to randomly and periodically check LED lighting products from the market and publish them to the public. Use this method to regulate market integrity to urge manufacturers to grasp the quality and effectively promote the healthy development of the LED lighting market.
All government departments should focus on national interests and people's interests, establish streamlined and efficient competent departments, organize social forces as soon as possible to formulate LED lighting product standards, establish statutory testing institutions, update testing methods and equipment, and formulate industry-wide testing standards (for reference). ENERGY STAR "Standard and Certification System" and establish a monitoring mechanism to maintain market norms (learn from the CALIPER mechanism). It is believed that under the leadership of the relevant government departments, through the joint efforts of social forces, the long-awaited national LED lighting product standards and specifications will certainly come out, and only in this way, China's semiconductor lighting industry can develop healthily.
(This article is reproduced on the Internet. The texts and opinions expressed in this article have not been confirmed by this site, nor do they represent the position of Gaogong LED. Readers need to verify the relevant content by themselves.)
Shock Collar Charger,Dog Training Charger,E Collar Charger,Dog Shock Collar Charger
Elite-tek Electronics Ltd , https://www.aetertek.ca