Lighting fixtures

Since the LED lamps have been asked for heat dissipation, everyone is concerned about the situation. A luminaire is divided into three major parts: the outer casing, the light source and the power supply. So today, let's solve the heat dissipation of the shell. At present, the technology mainly has the following heat dissipation methods.
Fin radiator:
This is the most common way to dissipate heat. It uses the aerospace aluminum stamping nickel reflow process. The heat sink is thin and light, which achieves the benefits of large convection of the heat dissipation area, but the cost is very high.
Thermally conductive plastic radiator:
Filling the plastic shell with a heat-conducting material during injection molding increases the thermal conductivity of the plastic, which can only be used in the civilian market.
Air Hydrodynamic Radiator:
This is to make a different sun flower line, using the CNC car to work out the air circulation effect.
Fan heat sink:
The aluminum is used as a heat carrier to make a convection effect, and the fan is used as a heat dissipation system, and the quality of the fan is extremely high.
Catheter cooling:
This kind of heat dissipation is mostly used for lamps above 100W. Copper pipes are used to seal the copper particles and adhere to the inner wall of the copper pipe to increase the heat dissipation convection. The copper heat conduction speed is very fast. Therefore, some copper pipes are designed for heat conduction under the light source to conduct heat. On the radiator.
Radiation radiator:
This is simple, apply a radiation heat sink to the heat sink.
Vacuum packaged heat sink:
The heat sink liquid is vacuum-filled into the heat sink core to ensure that the internal heat-dissipating liquid is not volatilized.

Solar Street Lights are raised light sources which are controlled by solar powered boards commonly mounted on the lighting structure or coordinated into the shaft itself. The sunlight based boards charge a battery-powered battery, which controls a fluorescent or LED light during the night. There are two types of solar light generally in the lighting market which called all in on solar street light and split solar street light.

Features of solar street lights: A modern solar street light has embedded solar panel, inbuilt lithium-ion batteries, battery management system, night and motion sensors as well as automatic controls. The fully automatic device comes with LEDs, inbuilt and replaceable Lithium-ion battery and passive infrared (PIR) sensors. A typical solar street light is weather-proof and water-resistant, has low insect attraction rate and low glare and has a longer life.

Advantages of solar street light: 

Environmental protection: solar energy is green, clean and renewable energy. And the widely using of the solar lights can low down the emmision of the carbon dioside.

Cost less to save money: Since the solar lights can be 100% energy, zero electric bill will be paid after the customers install the solar lights. And customers can also save the cost in wire trench.

More easy installation: Does not like electric lights, there is no need wire trench for solar light installation. Everyone can install the solar lights in a very shorten time.

more safe: Solar lights is DC low voltage compared to dangerous 110-220V AC electric power, it does not harm to human.

Solar Street Lights

Solar Street Lights,Solar Walkway Lights,Solar Powered Security Lights,Solar Street Light With Battery

Jiangmen Biaosheng Solar Energy Technology Co., Ltd. ,

This entry was posted in on